Apc Smart-ups Srt 10000va 230v (srt10kxli)

Output power capacity: 10.0kWatts / 10.0kVA
Output Connections: (6) IEC 60320 C13 (Battery Backup)
                                   (6) IEC 320 C13 (Battery Backup)
                                   (4) IEC 320 C19 (Battery Backup)
                                   (1) Hard Wire 3-wire (H N + G) (Battery Backup)
                                   (4) IEC 60320 C19 (Battery Backup)
                                   (3) IEC Jumpers (Battery Backup)
Nominal Output Voltage: 230V
Nominal Input Voltage: 230V, 400V 3PH
Input Connections: Hard wire 3-wire (1P + N + E), Hard wire 5-wire (3P + N + E)

APC Smart-UPS SRT 10000VA 230V
High density, double-conversion on-line power protection with scalable runtime.
 

• Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

• LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Output
Max Configurable Power (Watts)10.0kWatts / 10.0kVA
Output Voltage DistortionLess than 2 %
Output Frequency (sync to mains)50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages220 V, 240 V
Load Crest Factor3 : 1
TopologyDouble conversion online
Waveform typeSine wave
BypassInternal bypass (automatic and manual)
Input
Input frequency40 - 70 Hz Auto-sensing
Input voltage range for main operations100 - 275 Adjustable (half load), 160 - 275, 173 - 476 Adjustable (half load)V
Other Input Voltages220 V, 240 V, 380 V, 415 V
Batteries & Runtime
Battery typeLead-acid battery
Typical recharge time1.5hour(s)
Nominal Battery Voltage+/- 192 V (split battery referenced to neutral)
Replacement BatteryAPCRBC140
Expected Battery Life (years)3 - 5
RBC Quantity2
Battery Charge Power (Watts)1.195kWatts
Extendable Run Time1
Extended Run OptionsAPC-Smart-UPS-SRT-10000VA-230V
RuntimeView Runtime Graph
View Runtime Chart
EfficiencyView Efficiency Graph
Communications & Management
Interface Port(s)RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Control panelMultifunction LCD status and control console
Audible AlarmAudible and visible alarms prioritized by severity
Emergency Power Off (EPO)Yes
Available SmartSlot™ Interface Quantity1
Surge Protection and Filtering
Surge energy rating480Joules

Smart-UPS On-Line Features & Benefits
Serviceability
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Predictive failure notification.Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Audible alarmsProvides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Cold-start capableProvides temporary battery power when the utility power is out.
Input Power Factor CorrectionMinimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Marketing features
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Low operating and maintenance costs with proven reliability and intelligent battery management .Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Avoids costly power problems by keeping your IT equipment and data protected and available .Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Manageability
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
SmartSlotCustomize UPS capabilities with management cards.
Serial connectivityProvides management of the UPS via a serial port.
LED status indicatorsQuickly understand unit and power status with visual indicators.
Network manageableMost models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Adaptability
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
Availability
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
Scalable runtimeAllows additional run time to be quickly added as needed.
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.